T-BLADES
The T-Blade is the newest technology in skating. The unique system is 30% lighter than any other blade system on the market. It consists mainly of a specially developed glass fibre resin. This resin is resistant against impact, is highly elastic, and resistant against cold temperatures to -30 celsius! The 1mm thin gliding surface is made of extremely hard, cold tempered special steel and weighs only 6 grams!REASONS TO SWITCH TO T-BLADES: 30% lighter than any other blade system 40 % less gliding friction makes for a better, more consistant glide Extremely narrow turns Each blade lasts longer than conventional sharpening! Same, consistant sharpening every time Can be mounted on any conventional ice hockey skate No need to sharpen blade, easily replaceable at home or in the dressing room, blades are disposable No need to worry about poor sharpenings on the day of the big game
|
|
|
 |
|
T-Blade Chart in US SKATE SIZES
As you can see the System comes in three pieces. The HOLDER (CHASSIS), The STABILIZER (Holds the Blade or Runner as some call it), then at the bottom the actual BLADE / RUNNER
|
|
|
|
T Blade Holders
These are the holders for T-Blade complete system. Custom build yours with one of the many color choices. If your skates are mounted with the Rapid Mount Screw(RMS) system, you can easily change the blades to any color you choose. The glass fibre resin which the t´blade Holder is made of and its ingenious structure give it great torsional stiffness and high durability.Note: Always check your current blade size on your skates for proper t-blade sizing. Sizing shown is only a guideline and may not be exact for every manufacturers skates.If you look at the bottom of your current skates (blade up) you may see the size imprinted into the holder near the rivets.Please note we only get holders to order , so they are not available for Next day delivery.
£24.99 Euros30.24
|
|
SIZE / COLOUR
|
|
|
|
|
Stabilizers
There are two Stabilizers on each t´blade system: One holding the six screws and one holding the nuts. The one with the screws goes on the inside of the foot (if its the left skate the screws go on right side of it and vice versa). They function kind of like washers, and make it easy to put the screws and nuts in the right places and to switch Runners quickly. This is how you handle the Stabilizers to change your Runners:Unscrew each screw with your t´blade screwdriver without taking the Stabilizer out of its socket. Now use the screwdriver to push each srew back into the Stabilizer to press the nut on the other side out of its fitting. This makes it easy to remove both Stabilizers and take out the Runner.After inserting the new Runner into the Holder place the Stabilizers with the nuts in its socket first, and then push the nuts fully into the openings. Now the Runner is steadily in place already and it is easy to put the Stabilizer holding the screws in its place and tighten the screws. Replacement stabilizers for the T-Blade complete system. Custom build yours with one of the many color choices.Note: Always check your current blade size on your skates for proper t-blade sizing. Sizing shown is only a guideline and may not be exact for every manufacturers skates.UK SIZE / LENGTHUK 4.5 to 5.5 /248mmUK 6 to 7 /256mmUK 7.5 /264mmUK 8 to 8.5 /272mmUK 9 to 9.5 /280mmUK 10 to 10.5 /288mmUK 11 to 11.5 /300mmPlease note we only get stabilizers to order , so they are not available for Next day delivery.
£23.99 Euros29.03
|
|
SIZE
|
|
|
|
|
Metallic Stabilizers
UK SIZE /BLADE LENGTH UK 4.5 to 5.5 /248mmUK 6 to 7 /256mmUK 7.5 /264mmUK 8 to 8.5 /272mmUK 9 to 9.5 /280mmUK 10 to 10.5 /288mmUK 11 to 11.5 /300mmPlease note we only get stabilizers to order , so they are not available for Next day delivery.
£29.99 Euros36.29
|
|
SIZE / COLOUR
|
|
|
|
|
t-Blade Runners (Blades) -WHITE
Runner (blade) are made of a special glass fiber resin, which is super strong down to the lowest temperatures, and provides optimum elasticity and will not break. Locking disks enable blade replacement in a minute. Blade system with excellent thermal qualities Choice of rocker styles(Short(S), Medium(M) and Long(L)) Choice of hollow(radius) available in the UK 9mm, 11mm, and 13mm. T-Blade runners last 5 times longer than 5 sharpenings of a conventional blademeaning LESS SHARPENING.SOLD IN PAIRS only available in Black or WhiteUK SIZE /BLADE LENGTHUK 4.5 to 5.5 /248mmUK 6 to 7 /256mmUK 7.5 /264mmUK 8 to 8.5 /272mmUK 9 to 9.5 /280mmUK 10 to 10.5 /288mmUK 11 to 11.5 /300mmWhen choosing a runner, the option equals as follows: 256-L-11 = Blade Size 256- Large Rocker - 11mm(7/16") HollowAs T-Blade are no longer making the Black Runners, we may have only the white in a few sizes, so if your willing to have the white as a second choice please specify.
£15.28 Euros18.49
|
|
ROCKER - BLADE HOLLOW - SIZE
|
|
|
|
|
T-Blade Screwdriver Bit
With this bit, you simply pop it into your screwdrivers changeable head receiver , electric or manual and you can then remove your runners and stabilizers.
£5.99 Euros7.25
|
|
|
|
|
|
T-Blade Fitting
If you want your T-Blades fitted to your skates for you ,please send them to us and we'll send them back all ready to go !Return carriage will be an additional £5.50Remenber you need to order Holders, Stabilizers and runners for a full set up.
£30.00 Euros36.30
|
|
|
